Stained Glass 3D Pattern PDFs
Have you seen my YouTube Project Demonstrations? Want to try one of the projects yourself? You're in the right place! Scroll down to find what you're looking for below.
Beginning Boxes: All solid lines should be cut carefully with regular scissors, right on the lines. The Lids for both boxes are where you can draft your own pattern. If this is your first box, try 10-12 pieces. As you get more confident, you can increase the piece count. For the small box, start with 5-8 pieces, and increase with every additional box you make.
Beginning Rectangular Box Pattern
| beginning_lidded_box_pattern.pdf |
Beginning Small Lidded Square Box
| small_box_pattern.pdf |
Hinged Boxes: The dotted lines on the lid tops are where the hinge should go. Only one hinge side is needed. Be sure to place two break lines within that dotted line, so the hinge can attach to more than just the foil. Cut on the dotted line with regular scissors. Cut all of the outer edges of the pattern pieces with regular scissors.
Intermediate Hinged Box- Diamond Shaped
| sg_diam_hinge_box_pdf.pdf |
Intermediate Hinged Box- Octagon Shaped
| sg_oct_hinged_box.pdf |
Intermediate Small Lampshade Pattern
| lampshadepatternpdf.pdf |
Intermediate Small Lantern Pattern
| lantern_patternpdf.pdf |
